High-pressure hoses are often used in daily life, but there are also many accidents, such as explosions. So what is the reason why high-pressure hoses sometimes burst? Today, let’s take a look at the reasons why high-pressure hoses burst. Only by knowing the reasons can we know how to reduce the bursting of high-pressure hoses, so that we can better use high-pressure hoses and achieve the best benefits. Let’s take a look at the reasons why high-pressure hoses burst. Understanding the reasons will lead to better measures to prevent high-pressure hoses from bursting. . After lifting farm implements or harvesting tables to the transportation position and driving at high speed on uneven roads, the violent bumps of the suspension body cause an impact load several times greater than the original in the high-pressure hose. At this time, the safety valve is difficult to operate in an instant and forces the soft hose to lift. The pipe burst.
.Incorrect use of neutral position. During operation, due to uneven ground and undulating agricultural tools, the high pressure generated by the movement of the cylinder piston in the neutral position exceeds the pressure-bearing capacity of the hose and causes it to rupture.
.The automatic return mechanism of the distributor is abnormal, the control handle cannot jump back to the neutral position in time, and the operator fails to pull it back in time. The hose bears a large load for a long time and bursts.
.The opening pressure of the safety valve is adjusted too high, and the high-pressure hose is overloaded for a long time and bursts.
.High pressure hose is improperly installed. Burst due to twisting, bending, steel wire layer wear, corrosion, local overload, etc.
.High-pressure hoses are aging, cracked, or damaged due to long-term exposure to the sun, contact with gasoline, diesel, etc., which cause the hoses to corrode.
What are the causes of explosions in high-pressure hoses?